Haubergeon 50" and 60" chest half sleeve 31" long, Butted
|
Hauberks 50" and 60" chest full sleeves 36" long, Butted
|
Need a Gambeson to go with you Maille
Shirt? |
| Butted Maille- This is the most economical
construction style of maille, as the cost of labor-intensive riveting is
avoided. Butted maille has limited historical precedent but is fine for
general costuming and role-playing where strict construction authenticity
is not a requirement. It is not recommended for weapons-contact re-enactment.
Butted maille is available in mild steel, high-tensile steel and aluminum.
High-tensile steel has the most resistance to opening of the rings, while
mild steel butted rings may be distorted by heavy weapons contact. Aluminum
is much lighter and more comfortable for the costumer and role-player.
All rings are formed from round section wire and are 8mm internal diameter.
Construction is in the 4 in 1 pattern. Full specifications and available
finishes are shown against each specific item. |
AB2474 -- Haubergeon 50 inch chest half sleeve-31" long.
Size: Fits up to 44” chest size measured over a gambeson.
Construction: Butted.
Ring Type: Round Wire
Material: 16ga. mild steel.
Finish: Zinc Plated.
Ring Internal Diameter: 8mm.
|
AB2496 -- Hauberk 50 inch chest full sleeve-36" long.
Size: Fits up to 44” chest size measured over a gambeson.
Construction: Butted.
Ring Type: Round Wire
Material: 16ga. mild steel.
Finish: Zinc Plated.
Ring Internal Diameter: 8mm.
|
AB2518 -- Haubergeon 60 inch chest half sleeve-31" long.
Size: Fits 46” ~ 54” chest size measured over a gambeson.
Construction: Butted.
Ring Type: Round Wire
Material: 16ga. mild steel.
Finish: Zinc Plated.
Ring Internal Diameter: 8mm.
|
AB2540 -- Hauberk 60 inch chest full sleeve-36" long.
Size: Fits 46” ~ 54” chest size measured over a gambeson.
Construction: Butted.
Ring Type: Round Wire
Material: 16ga. mild steel.
Finish: Zinc Plated.
Ring Internal Diameter: 8mm.
|
| Dome-Head Riveted Maille- This style of maille
is reasonably authentic to the early medieval period, particularly in the
European flat ring (EFR) version. In steel this construction style has
the advantage of strength, allowing it to be used for supervised weapons-contact
re-enactment. More economical than wedge-riveted maille, the domed-head
riveted style is available in steel, in round wire and flat ring versions,
and in round wire aluminum. Riveted aluminum rings will maintain their
integrity well but aluminum maille is not recommended for weapons contact.
Construction is in the 4 in 1 pattern. Full specifications and available
finishes are shown against each specific item. |
Haubergeon 50" and 60" chest half sleeve Mid Thigh length,
Riveted.
|
Hauberks 50" and 60" chest full sleeves Mid Thigh length,
Riveted
|
|
Need a Gambeson to go with you
Maille Shirt?
|
AB2468 -- Haubergeon 50 inch chest mid-thigh half sleeve
Size: Fits up to 44” chest size measured over a gambeson.
Construction: Dome Head Riveted.
Ring Type: European Flat Ring
Material: 16ga. mild steel.
Finish: Natural.
Ring Internal Diameter: 8mm.
|
AB2490 -- Hauberk 50 inch chest knee length full sleeve
Size: Fits up to 44” chest size measured over a gambeson.
Construction: Dome Head Riveted.
Ring Type: European Flat Ring
Material: 16ga. mild steel.
Finish: Natural.
Ring Internal Diameter: 8mm.
|
AB2512 -- Haubergeon 60 inch chest mid-thigh half sleeve
Size: Fits 46” ~ 54” chest size measured over a gambeson.
Construction: Dome Head Riveted.
Ring Type: Round Wire
Material: 16ga. mild steel.
Finish: Natural.
Ring Internal Diameter: 8mm.
|
AB2534 -- Hauberk 60 inch chest knee length full sleeve
Size: Fits 46” ~ 54” chest size measured over a gambeson.
Construction: Dome Head Riveted.
Ring Type: Round Wire
Material: 16ga. mild steel.
Finish: Natural.
Ring Internal Diameter: 8mm.
|
